My Objective:
Repurpose an obsolete OS Filesystem as pure data storage, removing both the stuff only relevant for the OS and simplifying the directory structure so I don’t have to navigate to <mount point>/home/<username>/<Data folders like Videos, Documents etc.>.

I’m tight on money and can’t get an additional drive right now, so I’d prefer an in-place solution, if that is feasible. “It’s not, just make do with what you have until you can upgrade” is a valid answer.

Technical context:

I’ve got two disks, one being a (slightly ancient) 2TB HDD with an Ubuntu installation (Ext4), the second a much newer 1TB SSD with a newer Nobara installation. I initially dual-booted them to try if I like Nobara and have the option to go back if it doesn’t work out for whatever reason.

I have grown so fond of Nobara that it has become my daily driver (not to mention booting from an SSD is so much faster) and intend to ditch my Ubuntu installation to use the HDD as additional data storage instead. However, I’d prefer not to throw away all the data that’s still on there.

I realise the best solution would be to get an additional (larger) drive. I have a spare slot in my case and definitely want to do that at some point, but right now, money is a bit of a constraint, so I’m curious if it’s possible and feasible to do so in-place.

Particularly, I have different files are spread across different users because I created a lot of single-purpose-users for stuff like university, private files, gaming, other recreational things that I’d now like to consolidate. As mentioned in the objective, I’d prefer to have, say, one directory /Documents, one /Game Files, one /Videos etc. on the secondary drive, accessible from my primary OS.

Approaches I’ve thought of:

  1. Manually create the various directories directly in the filesystem root directory of the second drive, move the stuff there, eventually delete the OS files, user configs and such once I’m sure I didn’t miss anything
  2. Create a separate /data directory on the second drive so I’m not directly working in the root directory in case that causes issues, create the directories in there instead, then proceed as above
  3. Create a dedicated user on the second OS to ensure it all happens in the user space and have a single home directory with only the stuff I later want to migrate
  4. Give up and wait until I can afford the new drive

Any thoughts?

  • bloodfart@lemmy.ml
    3·
    4 months ago

    Hi.

    I have been through a drawer full of old drives of mine and a different drawer full of other people’s old drives that need tested/securely erased/parted out this summer so my instructions might be a little more “foolproof” or seem to have extra steps but here’s how you do what you wanna do:

    Plug up the drive

    Run “lsblk “ to show all the drives and their file systems. Use the information shown to both recognize your target drive and determine what partitions and file systems are on the drive. Once you recognize your drive, take note of its device name in the format /dev/sdx.

    Run “ls -l /dev/disk/by-id/ |grep sdx”, but replace sdx with your drives device name. This will list the drives in the system named for their model and serial numbers and show what devices in your operating system they correspond to. Piping the output through the grep command with “sdx” will only return the one that is your target drive. Take a picture of this with your phone or something. It’s probably too long to remember.

    Now do the same thing but in /dev/disk/by-uuid, so “ls -l /dev/disk/bu-uuid | grep sdx”. This will show you the uuid of the file systems on the partitions of your target disk. Uuids are unique identifiers for file systems and will be important later.

    Now you need to figure out what the different file systems on your target drive are. This part’s easy, just make a directory in your home folder, it doesn’t matter what it’s called. “mkdir nostromo”. Then make a set of directories in it corresponding to the different file systems you saw in the output of the uuid command. “Cd nostromo” “Mkdir sdx1 sdx2 sdx3 etc”. Do a quick “ls” just to make sure you made the right directories. Refer back to your picture of the uuid output to be sure you made directories for em all.

    Now you’re just about to go into the file systems of the drive and confirm what they are and make a plan to extract the payload, but first take a minute to make some assessments about what you have without actually getting your hands dirty: look at the output from lsblk. You can run it again no problem. How many partitions are there on the drive? How big are they? When a partition shows about 100MB in lsblk it’s probably a boot partition. If it shows about 1KB it’s probably a container for other partitions and you don’t need to worry about it. If it’s about the size of your ram or smaller then it’s probably a swap partition (although I think Ubuntu doesn’t use these by default).

    Now let’s go in and see what each one is. Start at the lowest numbered one and “mount /dev/sdxN nostromo/sdxN”. You might have to use sudo to do that. Then “ls nostromo/sdxN/“

    If you see stuff like “initrd “ or “kernel” it’s probably the Ubuntu boot partition and you won’t have anything to worry about in there. If you see “/root” and “/home” and “/bin” then that’s the Ubuntu root partition and thats pretty promising!

    Lather, rinse, repeat till you know what all the file systems of your drive are. Some advice: don’t worry about the 1k container partitions. They’re just there to get past the four primary partition limit. If you mount your old systems swap partition, you won’t be able to browse it with “ls”. Just confirm its swap by running “cat /proc/swaps” and looking for the one you just mounted. Unmount it with “umount /dev/sdxN” just like you mounted it.

    Once you have an idea of where your files are, unmount the file systems you’re not worried about with “umount /dev/sdxN” and get ready to find your files on the partition(s) they’re in.

    Go into the nostromo/sdxN folders that correspond to the file systems with files you wanna get with “cd nostromo/sdxN” Make a folder called “old” with “mkdir old”. Make sure you’re in the nostromo/sdxN folder you wanna be in with the “pwd” command. If it returns the one you expect then you’re good. Move everything in there into the “old” folder with “mv * old/“. That will error out when it tries to move the “old” folder into itself but now the contents of that drive are in the old folder.

    From here you can use terminal or gui tools to move files from the directories in the “old” folder to however you want it organized in the root of the file system. Maybe you want a folder called “recovered” with unsorted swaths of information inside it. Maybe you wanna painstakingly sort things out by media type. The file system is your oyster. When using gui tools sometimes you’ll be asked if you wanna move or copy the files. Move is what you want.

    Lather rinse repeat for all the file systems you think have stuff you care about.

    Once you found and moved your files, look again tomorrow. You might find more!

    After you’re absolutely sure you got em all, delete the old folder with “rm -r old/“.

    Once you’ve done that for all the old file systems with files you want on em, see if you can’t consolidate them together in one file system. If you can then delete the file systems and partitions you don’t need and expand the one you plan on using.

    Once you’re ready, use the saved partition as a data drive by adding it to your /etc/fstab using the uuid from earlier. A perfectly acceptable mount point is /mnt/data. That will make sure your operating system knows how to find it and mount it every time the computer boots up.