JetKVM is much like nanoKVM but a slightly polised version.

What is JetKVM?

JetKVM is a high-performance, open-source KVM over IP (Keyboard, Video, Mouse) solution designed for efficient remote management of computers, servers, and workstations. Whether you’re dealing with boot failures, installing a new operating system, adjusting BIOS settings, or simply taking control of a machine from afar, JetKVM provides the tools to get it done effectively.

As far as I know, these Jets are not available for retail yet, but can be bought via their kickstarter.

Link to the source code: https://github.com/jetkvm/kvm

Link to their website: https://jetkvm.com/

Link to their kickstarter: https://www.kickstarter.com/projects/jetkvm/

Picture of a JetKVM mounted in a homelab, credits to Jeff Gerling.

      • MangoPenguin@lemmy.blahaj.zone
        link
        fedilink
        English
        arrow-up
        13
        ·
        edit-2
        5 days ago

        That’s not too surprising since it’s Pi based, and that stuff is really expensive. The PCBs in those 2 links also look to use a lot of through hole parts, and are not optimized for low cost mass production.

        The JetKVM looks to use a cheaper SBC probably with a custom PCB actually designed to be cheap to produce, so it doesn’t have the Pi premium slapped on it.

      • skittlebrau@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        5 days ago

        I’ve got two JetKVM units on the way.

        TinyPilot and PiKVM are just way too expensive in Australia. Buying two would cost me about $1000 AUD, but two JetKVMs are only $260 AUD.

        • Auli@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          4 days ago

          Ouch I’ll just stick with the Nanos for now. Not in Australia but country probably has similar costs.

      • Auli@lemmy.ca
        link
        fedilink
        English
        arrow-up
        2
        ·
        5 days ago

        Around same price as nonokvm. Don’t know if I should replace mine with these.

      • vividspecter@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        ·
        5 days ago

        Prices vary but there’s also BliKVM where the V3 version is essentially a clone of the PiKVM (and goes for around 90 USD) and they have their own Allwinner chipset version that I have seen even cheaper than that (although not currently). So not too out of the ordinary.

      • AbidanYre@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        5 days ago

        According to the Kickstarter schedule, they’re shipping units right now.

        The last time this was posted I brought up pricing and schedule as being suspicious.